Niveo Professional NGSME16T2H - Manual (Page 235)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 235
MSTI6 No VLANs mapped
MSTI7 No VLANs mapped
Port Setting
STP Port Mode
Syntax:
STP Port Mode [] [enable|disable]
STP Port Edge [] [enable|disable]
STP Port AutoEdge [] [enable|disable]
STP Port P2P [] [enable|disable|auto]
STP Port RestrictedRole [] [enable|disable]
STP Port RestrictedTcn [] [enable|disable]
STP Port bpduGuard [] [enable|disable]
STP Port Statistics [] [clear]
Example:
STP>port mode 1-24 dis (Disable STP on port 1-24)
STP>port edge 1-24 en (Enable Edge port on port 1-24)
STP>port autoedge 1-24 en (Enable Auto Edge on P1-24)
STP>port p2p 1-24 en (Enable P2P mode on P1-24)
STP>port p2p 1-24 auto (Enable Automatic P2P detection)
STP>port bpdu 1-24 en (Enable BPDUGuard on P1-24)
Port Path Cost
Syntax:
STP Msti Port Cost [] [] []
Parameters:
: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
: Port list or 'all'. Port zero means aggregations.
: STP port path cost (1-200000000) or 'auto'
Example: Configure CIST 0 Port Path Cost