Measurement Computing eZ-NDT version 6.0.9 - Manual (Page 22)

4- 2 Windows and Menus 878493 eZ-NDT
Main Window
Test-specific information is located in the Project Panel. The panel includes Company Name and Part
Name (4), Serial Number (5), and Inspector’s Name (6). Pass/Fail information is included (8).
Item Description
1 Lists eZ-NDT Projects
2 Shows a picture of the part
3 Resets the counts to zero; resets the “Since”
time to computer clock date and time.
4 Displays name of company and part number.
The 2 fields are edited from the Acquisition Tab
under Edit / Configuration.
5 Serial number
6 Name of inspector
7 Automatically increments the serial number.
8 Pass: Displays the quantity of parts that passed.
Fail: Displays the quantity of parts that failed.
Project Panel
Curr: The current consecutive part.
This information is stored with the data after each NDT inspection. Company Name and Part Name are set
up in the Acquisition Tab of the Configuration window [selected from the Edit pull-down menu].
The part’s Serial Number and the Inspector’s Name can be manually entered in the text fields.
A picture of the part being tested can be overlayed using the button (2). To load a graphic
for the first time, or to change a previously loaded graphic:
(a) Left-click on the button (2). A “Part Picture” pop-up window appears.
(b) Right-click on the “Part Picture” pop-up window. A “Load Graphic Picture” context menu
appears.
(c) Left-click on the “Load Graphic Picture” menu. An “Open” window appears.
(d) Use the “Open” window to browse for your part image (.jpg or .bmp format). Then open the
image.
(e) You can re-size and reposition the part image.
Main Window with Part Image Displayed