Measurement Computing ADAC/5500 Series - Manual (Page 59)

6.4.3 ADAC-DC-37
The ADAC-DC-37 provides access to 16 of the 32 available auxiliary digital I/O channels from
ADAC/5501MF, ADAC/5501MF-V, ADAC/5503HR, and ADAC/5503HR-V boards. Two ADAC-DC-37
terminal boards are required to access all 32 digital I/O channels.
Each DC-37 terminal board can connect to an ADAC/5500 Series Board via a CA-G17-ADAC cable, or to
an optional CA-G37-x-ADAC extension cable, which interfaces between a CA-G17 cable’s orb and the
ADAC-DC-37 board (see figure on following page).
There is no active circuitry on the terminal board, thus the specifications of the PCI boards do not change
with use of the terminal board.
ADAC Series 908196
-54- ADAC/5500 Series User’s Manual