Measurement Computing ADAC/5500 Series - Manual (Page 45)

6. SPECIFICATIONS
6.1 ADAC/5500MF
Function: High speed, 8 channel multiplexed 12 Bit analog to digital
converter with 16 digital I/O lines for PC compatibles.
Bus Interface: The ADAC/5500MF plugs into the PCI bus, complies with
the industry standard "PCI Local Bus Specification
Revision 2.0 and higher".
Board Configuration: The ADAC/5500MF is completely software configurable:
The host PC sets all Bus-related selections. All data
acquisition-related configuration is done by the user via
the ADAC PCI Software Utility.
Calibration: The ADAC/5500MF is digitally calibrated.
6.1.1 A/D Inputs - ADAC/5500MF
Number of Inputs: 8 Single-Ended
Resolution: 12 bit (2.5mV/bit on 0 to 10 V range)
Acquisition Rate: 100 kHz max
A/D Full Scale Ranges: ±10 V
0 to 10 V
Differential Linearity: ±0.9 LSB, no missing codes
Gain Error: Adjustable to Zero
Gain Drift: ±5 ppm/ °C
Zero Error: Adjustable to Zero
Zero Drift: ±2 ppm/ °C
Signal to Noise and Distortion: S/(N+D) 73 dB min. @ gain = 1
Total Harmonic Distortion: -90dB (typical) @ gain = 1, measured to 5th harmonic
Full Power Bandwidth: 250 kHz
Input Impedance
Shunt Res. to Ground: 10 M ohm
Shunt Capacitance: 28 pf
On Resistance: 400 ohm
Overvoltage Protection: ±25 V (powered)
±40 V (unpowered)
ADAC Series 908196
-40- ADAC/5500 Series User’s Manual