Gasboy CFN Series Site Controller III - Manual (Page 18)

System Layout ICR
Page 14 MDE-4298D CFN Series Site Controller III Installation Manual · September 2009
ICR
Description
The ICR is a rugged and well-designed data entry terminal that gives users access to self-
service gas pumps. The unit is controlled by a microprocessor and communicates with the SC
using the RS-485 loop.
The unit is available with an ABA Track 2 magnetic stripe card reader. A 20-character Liquid
Crystal Display (LCD) is used to guide the user through the transaction. The display is backlit
so that it can be read at night. A membrane keypad incorporates easy-to-read legends and
provides the user with means to input data to the system.
Three different types of posts are available with the ICR. The standard unit has a blank post.
This post is used for mounting the ICR to the island. The ICR is also available with a receipt
printer post or a pump control post.
Special ICR for CNG
A special version of the CFN ICR is available for use in the Class 1, Division 2 area of CNG
sites (Model DETC). The dimensions of this unit are the same as those mentioned in
Figure 3-5 on page 15 . This unit is not available with an internal receipt printer or a PCU.
Location
The ICR should be located on the fuel island. The unit has been designed for an operating
temperature range of -40 to 104 °F with a relative humidity of 2 to 99% (non-condensing).
Adequate clearance must be provided to allow easy access to the post’s access covers. An ICR
with a receipt printer post or a pump control post requires a minimum of 18” clearance
between the post and any of the pumps/remote dispensers on the island.