Comtech EF Data XPA-200 - Manual (Page 61)

XPA200-7984-I-OPT1, X-Band SSPA Remote Control Remote Control
XPA200-7984-I-OPT1, Rev.2 5-9
5.8.1.5 Parity Bit
The default parity is even.
Set Parity Bit: xxxx = ODD
Confirmation: >DEV/SPB_xxxx'cr''lf'] or EVEN
Retrieve Parity Bit:
Confirmation: >DEV/SPB_xxxx'cr''lf']
5.8.1.6 LCD Contrast
The default is 15.
Set Contrast: _xx'cr' xx = 0 to 30
Confirmation: >DEV/CON_xx'cr''lf']
Retrieve Contrast: _'cr'
Confirmation: >DEV/CON_xx'cr''lf']
5.8.1.7 LCD Brightness
The default is 15.
Set Brightness: xx = 0 to 30
Confirmation: >DEV/LCD_xx'cr''lf']
Retrieve Brightness: _'cr'
Confirmation: >DEV/LCD_xx'cr''lf']
5.8.1.8 Lamp Test
The default is off.
Test Lamps: xxx = ON or OFF
Confirmation: >DEV/LAM_xxx'cr''lf']
Lamp Test Status: _'cr'
Confirmation: >DEV/LAM_xxx'cr''lf']