Comtech EF Data XPA-200 - Manual (Page 3)

Filename: XPA200-7984-I-OPT1_Errata_a.doc
1
Errata A
Comtech EFData Documentation Update
Subject: Various Changes
Date: February 28, 2003
Document: XPA200-7984-I-OPT1, X-Band SSPA Installation and
Operation Manual, Rev. 2
Part Number:
Collating
Instructions:
Attach these pages at the beginning of the
manual.
Comments:
The following changes provide updated information. This information
will be incorporated into the next revision.
Change Specifics:
1. Section 3.3.2.1 should be amended to include (amendments or
changes in bold):
. . .
EXT
mute on from external J4 control (see section 1)
ON muted by M&C control or via remote control
2. Section 5.8.2.2 should be amended to include (amendments or
changes in bold):
. . .
Confirmation: >DEV/MUT_xxx’cr’lf’]
Note: On Status queries, the ‘MUT’ command may also return EXT
(mute on from external J4 control) or INH (mute on or inhibited by
Mitec 2723B via J5).
3. Section 5.8.3.1 should be amended to include (amendments or
changes in bold):
. . .
TX_nnn’cr’ Transmit – ON/OFF/EXT/INH
. . .