Comtech EF Data turboIP-G2 - Manual (Page 94)

turboIP-G2 Performance Enhancement Proxy Revision 2
Management via the CLI or Web Server GUI CD-TURBOIP-G2
5–20
5.2.3.6.1 Selective Acceleration | View/Edit Rules Screen
Selection Entry Description Sect.
Insert Rule I Insert the rule before selected rule. –
Edit Rule E Modify the selected rule to change its variables. 5.2.3.6.1.1
Remove Rule R Remove one selected rule at a time. –
Move Rule M Move the selected rule to higher or lower order of rule ID. –
First F Go to the first screen where the rule ID at #. –
Last L Go to the last screen of the rule table at #. –
Scroll Up U Scroll up one screen at a time. –
Scroll Down D Scroll down one screen at a time. –
Selective Acceleration Rules can be applied to any IP traffic through the
turboIP-G2; assigning a Priority (1-8) and Bandwidth limit to IP traffic that falls
within the Rule.
For any traffic that meets the criteria of more than one Rule, the first (lowest #)
Rule will be applied.
The default acceleration rule creates one TCP rule for any TCP traffic, a bridge
rule for any other traffic that will not be accelerated, and a default rule is
applied to all traffic not meeting these two defined rules; the default rule
cannot be edited or removed.