Comtech EF Data turboIP-G2 - Manual (Page 51)

turboIP-G2 Performance Enhancement Proxy Revision 2
Configuration and Updating CD-TURBOIP-G2
4–3
4.3.1 CONSOLE Settings
The turboIP-G2 must be properly installed and cabled, and the user PC – running a terminal emulation
program such as HyperTerminal on Microsoft Windows – must be properly connected to the unit’s
serial ‘CONSOLE’ port. To ensure proper user communication/connectivity with this interface,
refer to the following table for proper configuration of the user PC’s dedicated serial port:
Item Setting Item Setting
Baud Rate 38,400 bps Hardware Flow Control None
Data Bits 8 Software Flow Control None
Parity None Terminal Emulation VT100/VT100J
Stop Bits 1 Cable Configuration Straight-through
4.4 End User License Agreement (EULA)
Upon initial startup of a new turboIP-G2 unit, the CLI will display the End User License Agreement
(EULA):
In order to access or otherwise proceed to the Configuration Wizard, the end
user is required to Accept the turboIP-G2 End User License Agreement.