Comtech EF Data SDM-9600 - Manual (Page 55)

Hardware Installation
Memotec Inc. 4-17
NOTE:
If the
OOS
LED on the SDM-9606 blade stays amber, the unit may be faulty.
Contact Technical Support for assistance ( “Technical Support” on page 1-8 ).
See also “Troubleshooting Tips” on page 6-1 for other critical error situations.
6 Green Off Off Off Application has started from a
power-on
Red Off Application has started from a soft-
ware reset
7 Green Green Off Off Application has started from a
power-on; at least one link is up
Red Off Application has started from a soft-
ware reset; at least one link is up
Stage OOS ST ALM H/S Current Status of the Unit
Table 4-1: SDM-9606 Front Panel LED States During Normal Initialization Sequence