Comtech EF Data SDM-9600 - Manual (Page 37)

Unpacking the SDM-9600
Memotec Inc. 3-3
• Maximum operating altitude: 4572 meters (15 000 feet)*
* NOTE:
Above 3048 meters (10 000 feet) altitude the maximum operating temperature
of the unit drops from 45°C to 35°C.
• Ventilation requirement: leave 5 cm (2 inches) of unobstructed space around the
unit. All unused slots must be closed with a filler panel.
3.2 Preparing the Site
3.2.1 What You Will Need
For trouble-free installation of the SDM-9600 hardware make sure you have the following
on hand:
• The SDM-9600 chassis, with all SDM-9606 blades, accessories, cables and
optional hardware you received in the product package. Refer to “Product
Description” on page 5-1 .
• At least one of the following configuration and management access devices:
- A console terminal (TTY terminal or a PC equipped with terminal emulation
software) for direct or dial-up connection to the console port on the front face
of the SDM-9606 blade
- A TELNET network device accessed through IP connectivity over LAN/
WAN
NOTE:
When you first take an SDM-9606 blade out of the box, the only configura-
tion device you can use is the console terminal, since the unit does not yet
have an IP address. For details, see
“Connecting the Console Terminal” on
page 4-18 .
CAUTION:
If you intend to use the HyperTerminal 
communications program as your console terminal, read the
“Notice Concerning HyperTerminal Connections” on page 8-1 .
• A sufficient number and length of cables for all digital ports:
These cables are not provided with the SDM-9600 product package.
- One RJ-48 to RJ-48 cable for each E1/T1 port (at least 26AWG, or 0.4mm)