Comtech EF Data SDM-9600 - Manual (Page 15)

Preface
Memotec Inc. 1-5
1.3.3 NetPerformer Software
The basic software set provides support of PowerCell voice and data (including legacy
user data) and IP routing over Ethernet, serial or digital ports using PowerCell WAN, PPP
or Frame Relay RFC-1490. The GSM A-bis/A-ter software license is sold separately.
Optional software licenses can be procured for support of SkyPerformer satellite access
and TCP Acceleration.
1.3.4 Changes to Console Operations
The following change to console operations was made in NetPerformer firmware version
V9.2.0 and higher. If you are familiar with earlier versions of the NetPerformer firmware,
this change should be taken into consideration before you configure or manage the
product.
• The way you access the NetPerformer console has changed to allow for multiple
user profiles:
CAUTION:
The default
LOGIN
is now
ADMIN
instead of
ACT
.
NOTE:
The default
PASSWORD
for this login remains
SETUP
.
For full instructions on setting up user profiles, refer to the Quick Configuration module of
the NetPerformer Reference Guides.