Comtech EF Data SDM-9600 - Manual (Page 38)

SDM-9600 with SDM-9606 Blades Hardware Installation Guide
3-4 Memotec Inc.
- One crossover cable for each E1/T1 port that must provide a
TE
connection
(connecting to
NT
equipment). All E1/T1 interfaces are strapped at the fac-
tory for NT mode
- Two BNC coaxial cables for each E1/T1 port that will be configured for E1-
75 operations
An adaptor is also required for an E1-75 connection on an E1/T1 port . The
following adaptors is available:
 Adaptor cable: RJ-48 to E1-75 dual BNC (Part No. 161-0469-001). See
“Adaptor Cable” on page 5-17 for details.
- One straight through 10/100/1000BaseT LAN cable, RJ-45M to RJ-45M, for
each Ethernet port
• For all voice transmissions using PowerCell, an Internet connection or access to a
private IP network that supports the TCP and UDP/IP protocols.
PPP, Frame Relay (RFC1490) and WAN (PVCR) connections can be made with-
out the requirement to support IP routing.
• All user equipment that will be directly connected to the digital ports.