Compuprint MDP40B Programmer Manual - Manual (Page 70)

A-68
ESC 6
Enables Upper Control Codes. (EPSON ESC/P2)
ASCII Code ESC 6
Hexadecimal Value 1B 36
Decimal Value 27 54
This command enables the printing of upper control codes (from 128 to 159). These
codes are treated as printable characters instead of control codes. This command has
no effect when the italic character table is selected and remains in effect even if you
change the character table.
ESC 6
Selects the Character Set 2. (IBM Proprinter XL24/XL24E, 2391+, 4722, 9068)
ASCII Code ESC 6
Hexadecimal Value 1B 36
Decimal Value 27 54
This command selects the character set 2.
ESC 7
Selects the Character Set 1. (IBM Proprinter XL24/XL24E, 2391+, 4722, 9068)
ASCII Code ESC 7
Hexadecimal Value 1B 37
Decimal Value 27 55
This command selects the character set 1.