Compuprint MDP40B Programmer Manual - Manual (Page 209)

C-67
ESC /
Set absolute vertical position in elementary steps. (Olivetti PR2, PR40+)
ASCII Code ESC / m n
Hexadecimal Value 1B 2F m n
Decimal Value 27 47 m n
If the document is not inserted, the printer feeds it in and positions it at n elementary
steps from the margin indicated by parameter m.
The elementary step value is expressed as n/240" or as n/216" depending on the value
selected from set-up. Parameter m may be set to the following values:
m Reference margin
0 bottom margin
1 top margin
The command is not accepted (command specification error) if:
• It is sent inside a printing field.
• If the value of parameter n is greater than the declared document length or lies
in the declared TOF or BOF.
• A device other than the front paper stand is selected.