Compuprint MDP40B Programmer Manual - Manual (Page 51)

A-49
Pitch Hexadecimal Decimal Decimal Value
m n m n (m x 256 + n)
Script
10 01 D4 1 212 468
12 01 D5 1 213 469
15 01 D6 1 214 470
17 01 D7 1 215 471
20 01 D8 1 216 472
24 01 24 1 36 292
PS 00 C8 0 200 200
ESC [ I
Sets font and pitch of a character. (IBM 9068)
ASCII Code ESC [ I c m n o p
Hexadecimal Value 1B 5B 49 c m n o p
Decimal Value
27 91 73 c m n o p
This command sets the pitch and the code page. The c, m, n, o and p parameters are
all two-byte parameters, where:
c Determines the number of parameter bytes. It is normally set to six or eight.
m This parameter is reserved and ignored.
n This parameter is effective only if the third parameter is specified and may
have the following hexadecimal values:
00, 90 Sets 10 pitch characters
00, 78 Sets 12 pitch characters
00, 60 Sets 15 pitch characters
00, 54 Sets 17,1 pitch characters