Compuprint MDP40B Programmer Manual - Manual (Page 160)

C-18
ESC )
Cancel bold face. (Olivetti PR2, PR40+)
ASCII Code ESC )
Hexadecimal Value 1B 29
Decimal Value 27 41
Cancels the bold face setting starting from the current position.
ESC *
Underline. (Olivetti PR2, PR40+)
ASCII Code ESC * n
Hexadecimal Value 1B 2A n
Decimal Value 27 42 n
Sets underlined printing starting from the current position and remains active until a
cancellation command is received. Parameter n defines the type of underline, which
can be set to the following values:
n Setting
0 Normal underline
3 Overline
4 Over and underline
The command is not accepted if it is sent with the OCR-A or B Font selected, or the
parameter n is set to any value other than those values mentioned above.