Compuprint MDP40B Programmer Manual - Manual (Page 24)

A-22
Where n
1
is equal to:
1
[(current position) – (horizontal position)] x
(
defined unit
)
32768-MOD
256
The default unit is 1/120 inch in Draft mode and 1/180 inch in LQ mode. If it would
move the print position outside the printing area, the printer ignores this command.
ESC +
Sets n/360-inch line spacing. (EPSON ESC/P2)
ASCII Code ESC + n
Hexadecimal Value 1B 2B n
Decimal Value 27 43 n
Range 0 < n < 255
This command sets the line spacing to n/360 inch. If the line spacing is changed, it
does not affect previous settings for vertical tabs or page length.
ESC 0
Selects 1/8-inch line spacing.
(IBM Proprinter XL24/XL24E, 2391+, 4722, 9068, EPSON ESC/P2)
ASCII Code ESC 0
Hexadecimal Value 1B 30
Decimal Value 27 48
This command causes line spacing to be set to 1/8 inch. If the line spacing is changed,
it does not affect previous settings for vertical tabs or page length.
In IBM 4722/9068 emulation, when the page-presentation-media (ESC [ F) command
sets the printer to process passbooks, the printer ignores the ESC 0 command.