Compuprint MDP40B Programmer Manual - Manual (Page 156)

C-14
ESC 3
Double width. (Olivetti PR2, PR40+, 2845)
ASCII Code ESC 3
Hexadecimal Value 1B 33
Decimal Value 27 51
Sets the printing of double-width characters starting from the current position. Each
character is printed twice its normal width and occupies two printing positions.
This setting remains active until the relevant cancellation command is received. The
command is not accepted if it is sent with the OCR-A or B font selected.
ESC 4
Cancel double width. (Olivetti PR2, PR40+, 2845)
ASCII Code ESC 4
Hexadecimal Value 1B 34
Decimal Value 27 52
Cancels the double width setting starting from the current position.
ESC d
Double height and double width. (Olivetti PR2, PR40+)
ASCII Code ESC d
Hexadecimal Value 1B 64
Decimal Value 27 100
Sets double height and double width printing in NLQ starting from the current
position. It has no effect on vertical positioning commands, which continue to work on
the basis of the current line feed value.