Compuprint MDP40B Programmer Manual - Manual (Page 106)

A-104
ESC [ K
Sets initial conditions. (IBM 9068)
ASCII Code ESC [ K n
1
n
2
Hexadecimal Value 1B 5B 4B n
1
n
2
Decimal Value 27 91 75 n
1
n
2
This command causes the printer to reset to its initial status, where:
n
1
normally set to 1
n
2
normally set to 4.
This command resets all setting to the power-on default state, except download
characters, patches, code page, font and page presentation media are set by this
command. In addition a document ejection occurs if the document has been printed on
(not at top of form).
The resulting settings are:
Character pitch 10 or 12 cpi
Line pitch 6 lpi
PPM cut form, 6.1 initial offset, 1.61 mm skew
Print style standard text
Buffer empty
Vertical tabs all cleared
Horizontal tabs every eight starting at 9
Print mode bidirectional
Print speed normal (draft)
Margins pos 1 and 82
Passbook defaults 200 mm wide, vertical fold