Compuprint MDP40B Programmer Manual - Manual (Page 64)

A-62
m = 0 maintains current density
m = 1 sets proportional spacing
m > 5 selects fixed pitch equal to 360/m cpi
This command overrides the current pitch setting.
This command selects the point (default value 10.5) attributes of the font according to
the following formula:
(n
2
x 256) + n
1 Point size =
2
n
1
and n
2
define size by point (1 point equals 1/72 inch).
(point size) x 2
n
2
= INT
256
(point size) x 2
n
1
= MOD
256
The point sizes available are the following: 8, 10, (10.5), 12, 14, 16, 18, 20, (21), 22, 24,
26, 28, 30, 32.
ESC x
Selects Letter Quality or Draft printing. (EPSON ESC/P2)
ASCII Code ESC x n
Hexadecimal Value 1B 78 n
Decimal Value
27 120 n
This command selects either LQ or Draft printing according to the following values:
n Selection
0 Draft printing
1 Letter Quality printing