Compuprint MDP40B Programmer Manual - Manual (Page 43)

A-41
DC2
Cancels compressed printing. (EPSON ESC/P2)
ASCII Code DC2
Hexadecimal Value 12
Decimal Value 18
This is a terminator code. It causes all data present in the print buffer to be printed. It
is accepted at any position within the line. The character that follows this command
will be printed as follows:
17 CPI → 10 CPI
20 CPI → 12 CPI
DC4
Cancels double width printing.
(IBM Proprinter XL24/XL24E, 2391+, 4722, 9068, EPSON ESC/P2)
ASCII Code DC 4
Hexadecimal Value 14
Decimal Value 20
This code cancels the double width printing set by SO or ESC SO code. It has no effect
if the ESC W or ESC has set double width commands.