Compuprint MDP40B Programmer Manual - Manual (Page 31)

A-29
In EPSON mode, the tab stop position set by ESC D is memorized as physical position
in the page and therefore it is not affected by changing the horizontal spacing. The
physical position of the tab stop depends on the horizontal spacing in operation when
ESC D is used. The ESC D 0 cancels all active tab stops.
ESC d
Spaces forwards relative dot position.
(IBM Proprinter XL24/XL24E, 2391+, 9068)
ASCII Code ESC d n
1
n
2
Hexadecimal Value 1B 64 n
1 n2
Decimal Value 27 100 n
1
n
2
Range 0 < n
1
, n
2
< 255
This command moves the print carriage of a (n
1
+ (n
2
*256))/120 inch displacement on
the right of its current dot position. If the selected position is outside the current right
margin, it is forced to the last column.
ESC EM
Loading/ejecting paper. (EPSON ESC/P2)
ASCII Code ESC EM n
Hexadecimal Value 1B 19 n
Decimal Value 27 25 n
This command controls the paper feeding according to the parameters below:
n Description
0, R Paper Ejection
8 Paper
Ejection
9 Current Paper Loading