Compuprint MDP40B Programmer Manual - Manual (Page 206)

C-64
ESC #
Assign reference for ESC L. (Olivetti PR2, PR40+)
ASCII Code ESC # n
Hexadecimal Value 1B 23 n
Decimal Value 27 35 n
This command defines the criteria for counting the number of lines selected by ESC L n.
With parameter n = 0, the ESC L command always feeds in the paper to the line
defined by the ESC T n command or, if it is not defined, to the minimum top margin
and, with parameter n > 0, the ESC L command is changed according to the following
values of parameter n of ESC # n.
n Behavior
0 Positions the document at line n defined by ESC L with a document edge reference
1 Positions the document at line n defined by ESC L with a reference at the top margin
defined by ESC T or, if no top margin is defined, at the minimum top margin
The command is not accepted if it is sent inside a printing field or a device other than
the front paper stand is selected.