Compuprint MDP40B Programmer Manual User Manual
Page 134
B-27
If the debug flag (0x40) has been set, the described string is sent together with the
vector of the values read by the reading sensor with the following format:
CR LF
n…n CR LF
where n…n is the number of readings performed by the sensor, in ASCII
CR
LF
format
1
st
scanning
1…1 CR LF
where 1…1 is the first read value, in ASCII format
2…2 CR LF
where 2…2 is the second read value, in ASCII format
…
N…N CR LF
where N…N is the Nth read value, in ASCII format
CR LF
2
nd
scanning (if rn
≥ 1 )
1…1 CR LF
where 1…1 is the first read value, in ASCII format
2…2 CR LF
where 2…2 is the second read value, in ASCII format
………………………….
N…N CR LF
where N…N is the Nth read value, in ASCII format
CR LF
Other
scanning
procedures
(if
necessary;
rn > 1 )
………………………….
FF