Compuprint MDP40B Programmer Manual - Manual (Page 169)

C-27
The command is not accepted (command specification error) if:
• A PC set is chosen with the OCR-A or B Font selected.
• One of the Olivetti sets followed in the table by at least one " * " is selected, when
the OCR-A font is selected.
• One of the Olivetti sets followed in the table by two " * " characters is selected,
when the OCR-B font is selected.
BEL
Bell. (Olivetti PR2, PR40+)
ASCII Code BEL
Hexadecimal Value 07
Decimal Value 7
Rings a bell to attract the operator’s attention.
DEL
Clear print memory. (Olivetti PR2, PR40+, 2845)
ASCII Code DEL
Hexadecimal Value 7F
Decimal Value 127
Clears the print buffer and the commands it contains.
Cancels the ESC sequence containing it.