Compuprint MDP40B Programmer Manual - Manual (Page 161)

C-19
ESC +
Cancel underline. (Olivetti PR2, PR40+)
ASCII Code ESC +
Hexadecimal Value 1B 2B
Decimal Value 27 43
Cancels the underline setting starting from the current position.
ESC `
Superscript - Subscript. (Olivetti PR2, PR40+)
ASCII Code ESC `n
Hexadecimal Value 1B 60 n
Decimal Value 27 96 n
Sets superscript or subscript printing, defined by parameter n, starting from the
current position, and remains active until a cancellation command is received.
If double height printing has been set, the command is interpreted but has no effect on
printing until double height printing is cancelled.
n Type
0 Superscript
1 Subscript
The command is not accepted if:
• It is sent with the OCR-A or B Font selected, in that these fonts do not accept any
attribute or print pitch changes.
• It is sent with parameter n equal to any value other than those indicated above.