Compuprint MDP40B Programmer Manual - Manual (Page 179)

C-37
ESC 2
Reset Bit Image Mode. (Olivetti PR2, PR40+)
ASCII Code ESC 2
Hexadecimal Value 1B 32
Decimal Value 27 50
Prints the contents of the buffer in BIM, executes a CR and cancels BIM.
ESC X
Set Relative Horizontal Position. (Olivetti PR2, PR40+)
ASCII Code ESC X
Hexadecimal Value 1B 58
Decimal Value 27 88
The command sets a relative horizontal position in elementary steps.
The command is only accepted with BIM set.
Parameter n defines a movement equal to n times the horizontal distance between two
points defined by parameter n of the ESC 1 command.