BSS Audio Prosys PS-8810 Owner's Manual - Manual (Page 99)

- 99 -
PS-8810
DIGITAL SIGNAL PROCESSOR
The Philips Pronto IR Remote Controls, TS1000 and TSU2000,
allow access to the PS8810’s IR commands. The Philips Pronto
runs configuration programs that may be created on the remote
itself or by using the software package ProntoEdit.
ProntoEdit documentation and software comes standard with the
TSU200 or is available for download from the Philips Web site at
http://www.pronto.philips.com/prontoedit4.htm. Please refer to
the Pronto User’s Manual for more detailed information.
After installing Pronto Edit, open the file “PS-8810 IR.CCF”. The file
is available at the IQ website http://www.IQAudioSystems.com/
software/PS8810 IR Control.zip . This provides a good place to
start.
The screen will look like the screen shot below.
The "HOME" folder contains the buttons located on the home
page. Double clicking on "Home" under the "HOME" folder will
open the 'Home' panel in the window to the right.
IQ ADDR 1 is a jump to the IQ ADDR 1 page. This is actually a
series of 8 different Pronto display screens.
Infrared Remote Control Philips Pronto
Philips Pronto