BSS Audio Prosys PS-8810 Owner's Manual - Manual (Page 14)

- 14 -
PS-8810
DIGITAL SIGNAL PROCESSOR
The unit is controllable and programmable using IQ for Windows
software (version 5.0 or later) via IQ Loop, or standard RS-232
serial port. As an IQ
® component, it can be controlled by an IQ
System ® , and with its distributed intelligence™ capability, can
continue to operate even when an IQ System is not connected.
The BSS PS-8810 can also act as a system interface to other IQ
components.
A Control Port implements analogue and digital I/O for external
control and monitoring using simple potentiometers, switch wall
controllers and indicator panels. Infra red remote control is built in
as standard and, almost any parameter can be programmed using
Philips Pronto, for example. Control is also available to third-party
system controllers from companies such as AMX and Crestron.
PS-8810C
The BSS PS-8810C includes a CobraNet
® network interface card
that allows an additional eight channels of digital audio input from
a CobraNet
® network and eight channels of digital audio output to
a CobraNet ® network. This enables compatibility with other
CobraNet ® systems such as Peavey’s Media Matrix. The CobraNet ®
card is also available as an upgrade option for the standard PS-
8810.
Introduction