BSS Audio Prosys PS-8810 Owner's Manual - Manual (Page 82)

- 82 -
PS-8810
DIGITAL SIGNAL PROCESSOR
The BSS PS-8810 has the ability to reconfigure itself with a single
command. Thirty-two 'Presets' can be stored and recalled via a
variety of means including the front panel, via a Control Port
Input, an IR command, or a scheduled 'Event'.
For a Preset to be stored, all of the individual controls needs to be
set up using IQ Win whilst on-line to the PS-8810, then the 'Store'
button pressed and a Preset selected.
To ensure that settings are not inadvertently lost due to selection of
a Preset instead of storage of a Preset, the "Prompt to recall or store”
checkbox allows a query window to display whenever a Preset
button is pressed in order to ensure the intent of the user.
Each Preset has a 32 character user definable label.
Preset Segue
This enables smooth level transitions between Presets. When a
Preset is selected, all of the fader settings are changed at a rate that
is determined by the ‘Preset Segue Settings’ box. The rate of
change can be either a 'Fixed Time' that is selectable from 0
second to 255 seconds or a 'Fixed Rate' that goes from 0.5dB/sec
to 40dB/sec.
12.0 Presets
b
c
d
1
2
3