BSS Audio Prosys PS-8810 Owner's Manual - Manual (Page 25)

- 25 -
PS-8810
DIGITAL SIGNAL PROCESSOR
An IQ System with a Host Computer and a BSS PS-8810
The installation of a BSS PS-8810 consists of installing the
hardware and configuring the unit via IQ for Windows (IQ Win)
software. An overview of this software starts from section 10.0 of
this manual. Refer also to the IQ for Windows on-line Help files for
instructions in setting up and operating your IQ software.
The hardware installation can be seen as these steps:
1) Connecting to a host computer
2) Connecting to the IQ Loop
3) Connecting the audio inputs and outputs
4) Connecting to the CobraNet ® Network (PS-8810C)
5) Connecting auxiliary devices
6) Connecting a modem (if required)
9.0 Hardware Installation & Connections