Input delay, Hardware delays, Input delay hardware delays – BSS Audio Prosys PS-8810 Owner's Manual User Manual
Page 59: Ps-8810, Processing functions input delay
- 59 -
PS-8810
DIGITAL SIGNAL PROCESSOR
A delay can be added to any of the Input Processing Sections in
order to time-equalize the various input signals. Delay is displayed
in IQ for Windows software in time, feet, and meters. Control range
is from 0 to 100 milliseconds in 20 microsecond steps. Delay time
can be adjusted up to a maximum of 2 seconds for each channel.
The delays in the PS-8810 are fixed and allow very precise
alignment of audio signals. Delay elements are available in each
Input Processing Section to ensure that audio alignment is
attained. The processing time delays of each of the various
components in the PS-8810 and CobraNet network need to be
taken into account in this alignment process. These are fixed
latencies in order to keep filter alignment together.
The various delays in the PS-8810 and PS-8810C are:
•
Input A/D Converter: 667us
•
DAC Converter:
520us
•
Input Processing:
1.665ms
•
Output Processing:
1.665ms
•
CobraNet:
5.333ms
Processing Functions
Input Delay
Hardware Delays
Input Delay