Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 53)

Console Commands 4-9
T C P / I P C o m m a n d s
SET IP [EN/DIS]
Selects whether to use IP-based protocols.
SET IP ACcess [EN/DIS/ALL] aa.bb.cc.dd
[Mask ee.ff.gg.hh]
Allows or prevents specified IP address from accessing print server.
SET IP ADdress
Sets IP address of print server.
SET IP ARP [EN/DIS]
Selects whether to use an IP address with an ARP packet.
SET IP BANNER [EN/DIS]
Sets printing of LPD job banners.
SET IP BOot n
Sets number of retries (n) for DHCP, BOOTP, RARP
SET IP CHKSUM [EN/DIS]
Enables or disables IP receive checksum.
SET IP FTime [EN/DIS]
Enables or disables fast timeout.
SET IP FTP [EN/DIS]
Selects whether to use the FTP protocol.
SET IP HTTP [EN/DIS]
Selects whether to use the HTTP protocol.
SET IP KEepalive n
Sets keep alive interval (n) in minutes.
SET IP LPD [EN/DIS]
Selects whether to use the LPD protocol.
SET IP MEthod [AUTO/BOOTP/RARP/DHCP/STATIC]
Sets method of getting IP address.
SET IP PING aa.bb.cc.dd
Sends IP ping packets to test the host connection.
SET IP PRObe [EN/DIS]
Enables or disables the TCP connection probe.
SET IP RARp nn
0 Both
1 no subnet
2 no router
3 neither
Default (0) - IP address is set with subnet mask and router that is the same address as host.
SET IP RANGE [EN/DIS/ALL]
Sets the valid range of IP addresses.
SET IP REtry [EN/DIS]
Enables or disables LPD retry continuation