Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 14)

2-4 MonarchNet2 Operating Instructions
E n t e r i n g t h e S u b n e t M a s k
IP networks are divided using subnet masks. The subnet mask address determines
where the IP address belongs in the network. It consists of four 3-digit numeric fields. 
Note:
If using the optional keyboard, enter the Subnet Mask you need using the
numeric keys and press Enter.
To change the setting, from the Main Menu, select Setup, then Network. Then follow
these steps.
1. Press  or  until you see Subnet Mask.
2. Press ENTER to view the Subnet Mask. The current setting is shown.
3. Press  or  to scroll through the positions.
For example, to change the Subnet Mask from 192 to 000, press
 or  to highlight the first position and press CHANGE until you see 0, then
press  to select the next position and press CHANGE until you see 0, then
press  to select the next position and press CHANGE until you see 0. Press
SET
to save the setting or press CANCEL to exit without saving.
If you enter a series of digits greater than 255 for any segment of the Subnet
Mask and press ENTER, the printer does not save the setting. However, no error
appears on the display.
Correct the IP address and then press ENTER to save the setting.
4. Press BACK until you return to the Home/Online screen.
NETWORK
Subnet Mask →
ENTER BACK
Subnet Mask
192.0.192.0
^
CHANGE SET CANCEL
Subnet Mask
192.0.192.0
^
CHANGE SET CANCEL