Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 34)

3-8 MonarchNet2 Operating Instructions
13. Enter the Time Zone Adjustment in hours and minutes, from Greenwich Mean Time
(GMT). This offset varies by location and time zone. For example, Eastern/Standard
time is five hours behind GMT. Use –5:00 for the offset. For an offset of 3.5 hours,
use 3:30.
Note:
Changes for Daylight Savings Time are not made automatically. If your time
zone participates in Daylight Savings Time, change the time zone offset
accordingly.
14. Set the TCP Window. 10240 is the default.
15. Set the TCP Port. Port 9100 is the default.
16. Set the TCP Timeout (in minutes). The default is 0, which is no timeout.
17. Set the Keepalive Timer (in minutes). The default is 1 minute.
18. Enable or Disable IP Receive CheckSum and Probe Idle Connections.
19. Select Retry Enable for LPD/LPR.
20. Select Enable Web Authorization Timeout to make the Web pages time out after five
(5) minutes of inactivity.
Note: The time out period is set for five minutes and cannot be changed.
21. Select Enable HP Jet Admin if using HP Jet Admin. No other settings are required
for HP JetAdmin.
22. Click Save Changes to save changes or click Save/Re-init Network to save the
changes and re-initialize the network with the new settings. Any changes made on
this screen or other screens do not take effect until you click Save/Re-init Network.
This process may take a few minutes.