Avery Dennison Monarch 9906 MonarchNet2 User Manual
Page 45
Console Commands 4-1
C O N S O L E C O M M A N D S
Use this chapter to configure the print server using Telnet. You must have a basic
understanding of Telnet commands. For initial setup, do not use Telnet, use auto-
discover mode. Once you have the IP address, you can use Telnet or a Web browser.
Remote shell support is a common UNIX
application that provides remote command
execution capability for networked devices. For more information, refer to your UNIX
documentation.
You can use Telnet if you do not have access to the MonarchNet2 software.
This chapter also includes information about the Network Packet (Console Passthru).
Note:
The default port is Port 23.
C o n v e n t i o n s
This section uses the following conventions:
KEYwords
Type the capitalized letters of each keyword instead of the whole
keyword. Some keywords require more capitalized letters than others.
For example,
SEt
KEYVAL
RAdio
[options]
Mutually-exclusive options are included within square brackets and
separated by a forward slash. Select only ONE of the options. For
example, [DISable/STRICT/FLEXible]
Values are included within brackets. Values that contain spaces
(multiple words) must be enclosed within quotation marks (""). For
example,
SEt EN PW
SEt EN PW "Store 876"
n
Numeric digits are indicated by the letter (n).
For example,
SEt IP BOot n
SEt IP BOot 5
SEt EN CHannel nn
SEt EN CHannel 11
4