Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 17)

Configuring the 802.11b/g and IP Settings 2-7
W i r e l e s s
Using the Wireless Menu, you can view the signal strength, set the Service Set Identifier
(SSID), wireless mode, A-Point density, transmit rate, and channel.
Note:
All nodes of a wireless network need to have the same settings to communicate
with each other. We recommend reviewing the terms in the glossary before you
begin.
If the printer is not communicating with the print server’s network card, the
Network Menu options do not appear.
Setup Menu
Supply
Contrast
Defaults
Network Port
Settings Flash
Memory
RT Clock
Interpreter
MAC
Address
IP
Address
Subnet
Mask
IP
Gateway
Boot
Method
Wireless
Default
Network
Signal
Strength
SSID
Wireless
Mode
APoint
Density
Transmit
Rate
Channel
The options are listed in the table below.
Option Choices
Signal Strength 0 to 100
SSID xxxxxxxxxxxxxx
Wireless Mode
Infrastructure or Ad-Hoc
APoint Density Low/Med/High
Transmit Rate 1/2/5.5/11/12/18/24/36/48/54
Channel 1 to 11