Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 19)

Configuring the 802.11b/g and IP Settings 2-9
Entering the SSID
The Service Set Identifier (SSID) is a unique identifier that must match for all nodes on a
subnetwork to communicate with each other. It consists of up to 32 characters (any
printable character, including spaces). If using the space character, it must be enclosed
in quotation marks.
Note:
The SSID is case-sensitive. If using the optional keyboard, enter the SSID you
need using the numeric keys and press Enter.
To change the setting, from the Setup Menu, select Network, then Wireless. Then follow
these steps.
1. Press  or  until you see SSID.
2. Press ENTER to view the SSID. The current setting is shown.
3. Press CHANGE to change the SSID.
Press  or  to scroll through the positions.
For example, to change the SSID from ABC to DOR, press
 or  to highlight the first position and press CHANGE until you see D, then
press  to select the next position and press CHANGE until you see O, then
press  to select the next position and press CHANGE until you see R. Press
SET
to save the setting or press CANCEL to exit without saving.
Hold CHANGE to scroll quickly through the characters from 0-9;A-Z;a-z or press
CHANGE
once to scroll one character at a time.
To clear the SSID, press  and  at the same time when you are at the end of
the SSID field. If you are in the middle of the field and you press  and  at the
same time, any characters to the right of the cursor are cleared.
4. Press BACK until you return to the Home/Online screen.
WIRELESS
← SSID →
ENTER
BACK
SSID
ABC1234
^
CHANGE SET CANCEL
WIRELESS
SSID
ABC1234
^
CHANGE SET CANCEL