Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 49)

Console Commands 4-5
SET LOAd IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load).
SET LOAd SOftware
Sets print server’s firmware filename to load.
SET LOAd XModem
Begins XModem serial download of new firmware.
SET PAssword
Sets console password. The user is prompted for old password, new password, and to verify
new password. The default password is access.
Note: The password is case-sensitive.
SET PROtect
Sets the update password.
SET SERVEr NAme
Sets server node name.
SHow DATE
or
DATE
Shows the current date in format Day mm/dd/yy hh:mm:ss.
SHow FATal
Shows the fatal error log.
SHow FREE
Shows amount of available memory.
SHow LOAd
Shows the print server’s firmware update parameters.
SHow SERVEr
Shows the server parameters.
SHow SERVEr COunters
Shows the server statistics.
SHow SERVEr QUeue
Shows the print server internal queue.
SHow SERVIce
Shows service parameters.
SHow TEstpage
Prints a test page.
SHow TIME
Shows the current time in format hh:mm:ss.
SHow VErsion
Shows the server firmware version.
UNPROTect
Allows the user to enter the update password (if one has been defined).
Once the update password is entered correctly, SET commands can be used to modify the
configuration until the console session is closed with EXIT.
ZEro
Zeros statistical counts.