Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 25)

Configuring the 802.11b/g and IP Settings 2-15
Factory Defaults
If you reset the print server to factory defaults, the following values are restored. Some
settings may stay the same, depending on your network configuration.
Description Default
MAC This value is hard-coded and does not change
TCP/IP Enabled
Name
PXR_xxxxxx (xxxxxx = the last six digits of the MAC address.)
IP Address *
Subnet Mask *
IP Gateway *
Boot Method *
Boot Tries 3
Timeout 0 min
Keep Alive 1 min
SSID
LPD banner
Disabled
LPD retries Disabled
Port X1
TCP port
9100
WiFi Mode Infrastructure
Speed 54
Actual SSID
“discover any AP set for broadcast”
Encryption Disabled
Authentication Type
Open System
AP density Low
International Roaming Flexible
Regulatory Domain
USI (United States, Indoor)
* May keep previous values based on network configuration.