Avery Dennison Monarch 9906 MonarchNet2 User Manual
Page 23
Configuring the 802.11b/g and IP Settings 2-13
Channel
This option selects the channel on which your network devices communicate. All devices
must be on the same channel to communicate. Other radio devices such as Bluetooth
wireless devices, microwave ovens, or 2.4-gigahertz cordless phones may operate on the
same channel as your network. Channels 1-11 are available. Use the channel for Ad-
Hoc mode. In infrastructure mode, the channel is negotiated with the access point and
this setting is ignored.
Note:
Make sure all network devices are set to the same channel.
To change the setting, from the Setup Menu, select Network, then Wireless. Then follow
these steps.
1. Press or until you see Channel.
2. Press CHANGE to highlight Channel. The current setting is shown. Press
or to scroll through the options.
3. When you see the Channel setting you need, press SET to save the change. Press
CANCEL
to leave it unchanged.
4. Press BACK until you return to the Home/Online screen.
Note:
If you have problems connecting to your network, change the channel to at least
three channels lower or higher than any other wireless networks within range.
WIRELESS
← Channel →
11
CHANGE BACK
WIRELESS
Channel
← 11
1
SET
CANCEL