Avery Dennison 6030 Operator Handbook - Manual (Page 84)

Keypad Test
The Keypad test displays the ROW # and COLUMN # for each
key you press on the keypad. There are 6 rows and 6
columns (0-5). For example,
b is (0,0), and E is (0,5).
To test any key:
1. From the HDW TEST MENU, press > until you see:
Display
Keypad
2. Press e . You will see PRESS A KEY.
3. Press the key you want to test. You will see the Column
and the Row location of the key you pressed. The test
returns to the Keypad prompt.
n
The e key covers two positions; one set of numbers for
the left side and another set of numbers for the right side.
Motor Test
The motor test verifies the functionality and speed of the
motor by discharging labels.
To test the motor:
1. From the HDW TEST MENU, press > until the cursor is
on motor.
2. Press e to select it. Labels will dispense and you
will see:
Press ESC key
to EXIT
3. Press b to exit the test.
6030 Operator’s Handbook
10-18