Avery Dennison 6030 Operator Handbook - Manual (Page 22)

Loading for Non-Peel Mode ––––––––––––––––––––––––––––––––––
Non-Peel mode feeds the supply through the printer in one
continuous strip. Use Non-Peel mode to print strips of labels,
tags, or specialty paper.
To load your supply:
1. Turn the printer on. After the printer initializes, press l .
You will see:
RELOADING_
1 = Exit
2. Press the latch buttons as shown and open the supply
cover completely.
Supply
Cover
Latch
Button
6030 Operator’s Handbook
3-8