Avery Dennison 6030 Operator Handbook - Manual (Page 37)

Receiving Data –––––––––––––––––––––––––––––––––––––––––––––
Follow these steps before you begin to receive data from your
host (such as an application).
n
Remember, your application may already be in the printer and
you may not have to download any files.
1. From the MAIN MENU, press > until you see:
Start App.
Data Transfer
2. Press e . You will see:
TRANSFER MENU
Receive
3. Press e . You will see:
WAITING
4. Send the data from the host. You may see messages on
the printer’s display as data is received.
5. When you complete the transfer...
✦ If your application begins automatically, disconnect the
cable from the printer.
n
Make sure you grasp the connector when removing the
communications cable. DO NOT pull on the cord.
✦ If you see WAITING, you will need to start your
application.
a. Disconnect the cable from the printer.
n
Make sure you grasp the connector when removing the
communications cable. DO NOT pull on the cord.
Chapter 5. Transferring Data
5-3