Avery Dennison 6030 Operator Handbook - Manual (Page 72)

The Print Speed test allows you to verify that the supply is
moving through the printer at the correct speed for printing
scannable bar codes.
The Gray Scale test checks the uniformity of the printing.
To run the Test Pattern:
1. Press e to select Printing from the HDW TEST
MENU. You will see:
PRINTING TESTS
Test Pattern
2. Press e . You will see READY.
3. Press the trigger to print the test sample shown below.
If your printed test sample has fewer lines or no lines, keep
the test sample and call Service.
n
This test must be performed in Non-Peel mode.
6030 Operator’s Handbook
10-6