Avery Dennison 6030 Operator Handbook - Manual (Page 34)

To print labels in On-Demand mode:
1. Press the trigger.
2. Apply the label.
The next label prints automatically. Repeat these steps to
continue to print and apply more labels.
n
To remove excess backing paper, gently tear it against the exit
chute.
Printing in Continuous Mode
In Continuous mode, the printer prints one supply or a strip of
supply with one press of the trigger. Supplies may be thermal
labels, tags or specialty paper.
n
For Continuous mode, you must load supplies for Non-Peel
mode.
To print in Continuous mode:
1. Press the trigger.
2. When printing stops, cut the supply and remove the strip.
6030 Operator’s Handbook
4-8