Avery Dennison 6030 Operator Handbook - Manual (Page 52)

Cleaning the Printhead ––––––––––––––––––––––––––––––––––––––
Clean the printhead
✦ after using 7-10 rolls of supplies.
✦ in extreme temperatures, humid conditions or dirty
environment.
✦ when you see voids in the print.
✦ after a supply jam.
c
Use isopropyl alcohol on the interior areas only, never on the
exterior. DO NOT use silicone to clean or lubricate.
Use any of the following items to clean the printhead:
✦ soft cloth moistened with isopropyl alcohol
✦ Monarch Cleaning Pen #114226
✦ Monarch 6076 T M Cleaning Kit
c
✦ DO NOT use sharp objects to remove adhesive or label
particles from the printhead area. This may damage the
printhead and void your warranty.
✦ Always ground yourself before cleaning the printhead.
This prevents electrostatic discharge.
To clean the printhead:
1. Turn the printer off.
2. Open the supply cover and remove the supply roll.
3. Check the supply holder for adhesive buildup, and clean if
necessary.
4. Ground yourself by touching something metal.
6030 Operator’s Handbook
7-4