Avery Dennison 6030 Operator Handbook - Manual (Page 75)

To adjust the contrast:
1. Press eto select Printing from the HDW TEST
MENU.
2. From the PRINTING MENU, press >until you see
Contrast.
3. Press e.
4. At Supply Type?, use the arrow keys to select the supply
type you need and press e.
5. At Bar code Type?, use the arrow keys to select the bar
code type you need to adjust. Then press e.
1= Serial bar code printing
2= Parallel bar code printing
3= Both - Serial/Parallel bar code printing
4= MaxiCode bar code printing
or
b= Exit
n
If you are not sure what Bar code Type you have, see "Sample
of Bar Code Types."
6. At Contrast #1, 2 (or last value entered), press
>to adjust the contrast in increments of +/- 1. The
higher the number, the darker the print; the lower the
number, the lighter the print.
7. Press e. The test
sample shown prints
automatically. The display
returns to Contrast #.
8. Press b until the cursor is
at the MAIN MENU.
Chapter 10. Using Diagnostics
10-9