Avery Dennison 6030 Operator Handbook - Manual (Page 64)

Problem Solution
Printer partially prints
on the supply and fails
to respond to the
keypad or trigger.
(RECHARGE does not
appear on the display.) Switch to a fully charged handle.
Load the supply correctly.
Printer fails to respond
to the keypad during
data entry.
(RECHARGE does not
appear on the display.) Switch to a fully charged handle.
Scanner will not scan
a bar code. See "Scanning Tips" in Chapter 8.
The bar code symbol may have voids. Scan
a previously scanned bar code to verify that
the scanner is working. If the scanner is not
working, ask your System Administrator to
run a scanner test.
If none of these solutions works, call Service.
6030 Operator’s Handbook
9-2